This kit fits the following:

• Buick Apollo 1975 Disc Brake Spindle
• Buick Century 1973-1977 Disc Brake Spindle
• Buick Estate Wagon 1977-1978 With OE 11" Rotor Spindles
• Buick LeSabre 1977-1978 With OE 11" Rotor Spindles
• Buick Regal 1973-1977 Disc Brake Spindle
• Buick Skylark 1975-1978 Disc Brake Spindle
• Cadillac Seville 1976 Disc Brake Spindle
• Chevrolet Camaro 1970-1978 Disc Brake Spindle
• Chevrolet Chevelle 1973-1977 Disc Brake Spindle
• Chevrolet Chevelle Concours 1977-1978 All
• Chevrolet El Camino 1973-1977 All
• Chevrolet Impala 1977-1978 With OE 11" Rotor Spindles
• Chevrolet Malibu 1973-1977 Disc Brake Spindle
• Chevrolet Monte Carlo 1973-1977 Disc Brake Spindle
• Chevrolet Nova 1975-1978 Disc Brake Spindle
• GMC Sprint 1973-1977 All
• Oldsmobile 442 1973 Disc Brake Spindle
• Oldsmobile Custom Cruiser 1977-1978 With OE 11" Rotor Spindles
• Oldsmobile Cutlass 1973-1977 Disc Brake Spindle
• Oldsmobile Cutlass Supreme 1976 Colonnade
• Oldsmobile Cutlass Supreme 1974-1975 Cruiser
• Oldsmobile Cutlass Supreme 1973-1977 Disc Brake Spindle
• Oldsmobile Cutlass Supreme 1975 Hurst
• Oldsmobile Delta 88 1977-1978 With OE 11" Rotor Spindles
• Oldsmobile Omega 1975-1978 Disc Brake Spindle
• Oldsmobile Vista Cruiser 1973-1976 Disc Brake Spindle
• Pontiac Bonneville 1977-1978 With OE 11" Rotor Spindles
• Pontiac Catalina 1977-1978 With OE 11" Rotor Spindles
• Pontiac Firebird 1970-1978 Disc Brake Spindle
• Pontiac Grand Am 1973-1975 Disc Brake Spindle
• Pontiac Grand Prix 1973-1977 Disc Brake Spindle
• Pontiac GTO 1973 Disc Brake Spindle
• Pontiac Tempest LeMans 1973-1977 Disc Brake Spindle
• Pontiac Phoenix 1977-1978 Disc Brake Spindle
• Pontiac Trans Am 1970-1978 Disc Brake Spindle
• Pontiac Ventura II 1975-1977 Disc Brake Spindle

Kit includes:

• F1 2 piston calipers 002-0054SSP-1 / 002-0054SSP-2
• #1 Standard F1 Pads 6-1019 or #85 Aggressive Braking F1 Pads 6-006485
• 10.75x .310 steel revolution rotors 3-10753105525D
• Aluminum caliper mounting brackets 16-0202
• Aluminum 5 on 4.75 hubs 8-103
• Timken bearing, races and seals
• 1/2 -20” wheel studs
• All necessary mounting hardware.

Kit weight: 20 lbs

TBM 2 Piston (F1/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.

Please note: #85 compound pads need only be used in hard braking situations. We do not recommend or suggest these for any situations where light braking or non extreme conditions are not present.

https://youtu.be/q4mHRE3Vm4M

⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

*Please use red Loctite on all rotor bolts*

Installation Instructions

Additional Installation Info

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.