82-87 Pontiac Bonneville Drag Racing Front Brake Kit (F3 Caliper) 001-0272

Kit weight: 24 lbs

This kit fits the following:

• Buick Century 1979-1981 All
• Buick Grand National 1982-1987 All
• Buick Regal 1979-1987 All
• Buick Regal Grand National 1982-1987 All
• Chevrolet El Camino 1979-1987 All
• Chevrolet Malibu 1979-1987 All
• Chevrolet Monte Carlo 1979-1988 All
• Chevrolet S10 Blazer 1983-1997 4 x 2
• Chevrolet S10 Pickup 1983-1996 4 x 2
• Chevrolet S10 Pickup 2003 4 x 2 w/ Disc Brake Rear
• Chevrolet S10 Pickup 1997-2003 4 x 2 w/ Drum Rear
• Chevrolet S10 Pickup 1982 All
• GMC Caballero 1979-1987 All
• GMC Jimmy 1992-1997 4 x 2
• GMC S15 1983-1990 4 x 2
• GMC S15 1982 All
• GMC S15 Jimmy 1983-1991 4 x 2
• GMC Sonoma 1991-1996 4 x 2
• GMC Sonoma 2003 4 x 2 w/ Disc Brake Rear
• GMC Sonoma 2003 4 x 2 w/ Drum Rear
• GMC Sonoma 1997-2002 4 x 2 w/ Drum Rear Brake
• Isuzu Hombre 1996-2000 4 x 2
• Oldsmobile Cutlass 1979-1981 Base
• Oldsmobile Cutlass Calais 1979-1984 Base
• Oldsmobile Cutlass Calais 1983-1984 Hurst
• Oldsmobile Cutlass Cruiser 1980-1983 All
• Oldsmobile Cutlass Salon 1979-1986 442
• Oldsmobile Cutlass Salon 1979-1987 Base
• Oldsmobile Cutlass Salon 1979-1980 Brougham
• Oldsmobile Cutlass Salon 1979 Hurst
• Oldsmobile Cutlass Supreme 1987 442
• Oldsmobile Cutlass Supreme 1979-1987 Base
• Oldsmobile Cutlass Supreme 1979-1981 Brougham
• Oldsmobile Cutlass Supreme 1981 LS
• Oldsmobile Cutlass Supreme 1988 RWD only
• Pontiac Bonneville 1982-1987 All
• Pontiac Grand Am 1979-1980 All
• Pontiac Grand Prix 1979-1987 All
• Pontiac LeMans 1979-1980 All
• Pontiac LeMans 1981-1983 All (Canada)

Kit includes:

• F3 4 piston calipers 002-0056SSP-1 / 002-0056SSP-2
• #1 compound low temp track pads 6-0102W
• 10.75x .280 steel revolution rotors 3-10753105525D
• Aluminum caliper mounting brackets 16-0257
• Aluminum 5 on 4.75 hubs 8-103
• Timken bearing, races and seals
• 1/2 -20” wheel studs
• All necessary mounting hardware.

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty. 

*Please use red Loctite on all rotor bolts*