Skip to product information
1 of 1

TBM Brakes

82-92 Chevy Camaro Spindle Mount Wheel Front Drag Racing Brake Kit 001-0275

Regular price $1,099.00
Regular price Sale price $1,099.00
Sale Sold out
Shipping calculated at checkout.

82-92 Chevrolet Camaro Spindle Mount Wheel Front Drag Racing Brake Kit 001-0275

TBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.

This spindle front brake kit works with the following:

  • 82-92 Chevrolet Camaro

Included in this kit:

 *Note: this kit requires you to use supplied Set 34 bearings in lieu of current outer wheel bearings. If using non supplied bearings, please use comparable bearing to supplied Set 34

For custom bolt pattern please contact us directly, otherwise OE factory bolt pattern will be issued.

TBM 2 Piston (F1/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.


Please note: #85 compound pads need only be used in hard braking situations. We do not recommend or suggest these for any situations where light braking or non extreme conditions are not present.

Note: Picture displayed is not accurate to the following kit listed above

*Please Call for lead times before ordering*

*Please use red Loctite on all rotor bolts*

Installation Instructions

Additional Installation Info

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.